HOW TO FIX BLUE SCREEN OF DEATH


Computer error blue screen white letters, also known as machine Dump or BSOD (Blue Screen Of Death) is a common error on the computer  to install the Windows operating system . This bug has many causes, can be caused by hardware and software. How to know exactly where it came from Dump error is relatively difficult. However, in some specific cases you will easily localize questionable ingredients and remove this error.
HOW TO FIX BLUE SCREEN OF DEATH
HOW TO FIX BLUE SCREEN OF DEATH
HOW TO FIX BLUE SCREEN OF DEATH

The following article will give a list of some of the causes for the blue computer screen white letters (abbreviated Dump) and how to fix corresponding to each case.
The entire contents of the article is the actual synthesis process from  computer repair  to his friend's acquaintance. Can not be 100% accurate, and should add more. Readers can comment via a comment function at the bottom of the article. The method is mainly used by exclusion, each step taking steps to restart the test, if not transferred to the next step.
Note: In order for the test and determine the most accurate error. Before reading the next section you should do the following:
  • Using Norton Ghost conducted similar software or backup the operating system being used.
  • Using visually check any capacitors on the mainboard has been consistent or not.
  • RAM foot hygiene techniques and RAM slot, and check whether the RAM on chip, IC or capacitor any loose or falling out or not.
  • Fasten the power cable, power cable CPU, hard drive cable, USB cable, audio cable ...
1. Dump the computer has finished booting BIOS boot screen yet seen by the operating system (Phase current logo and bar loading)
The cause of this situation is mostly due Dump of hard drive errors. Can be identified by choosing the wrong standard hard drive (IDE SATA) hard drive with bad or even the first sector. Besides also due Mainboard RAM or operating system. However less common. You should focus on your hard drive
How to fix the following:
  • The BIOS  identifies the standard switch into a remaining hard drive (IDE is converted into SATA or vice versa)
  • Then restart the computer, if still incomplete scans your hard drive for bad sectors (Using Hirenboot> Hardisk Tools> HDD Regenerator)
  • If the results do not have bad sectors, and delay. You try to replace other RAM.
  • Rather RAM still not all you should proceed to install new windows.
  • And finally, if set win still not all, you should borrow a similar motherboard parameters (preferably the same model) to attach to and check.
2. Dump Computer equipment when finished boot screen of the operating system.
The main cause of this situation is mostly due to incorrect Windows drivers or the software running on startup conflicting
How to fix:
  • Proceed boot into Safe Mode Mod (press F8 key repeatedly as he loaded the BIOS)
  • Uninstall the driver of the device on and off all the startup programs
  • Restart Windows if in normal, proceed to install the correct driver (recommended up its home page to download the correct)
  • Still not to be the case, proceed to change the RAM or reinstall windows
3. Dump Computer is using a certain fixed software.
The main reason can be easily determined by the software and operating system conflicts.Windows can also be dropped off by certain elements to light. the installation of software or problem
How to fix:
  • Search for other installations conducted reinstall faulty software.
  • Reinstall Windows to ensure that stable windows (so installation should not ghost).
  • Best after installing windows and full driver you should install the software and test it first right.
  • If not satisfactory, try upgrading your operating system to a newer version of XP -> Win 7 -> Win 8 ...
4. Dump the machine was fixed to a folder:
The cause can be determined due to hard drive problems. You should conduct scans and delay bad sectors on your hard drive (CD Use Hirenboot> Hardisk Tools> HDD Regenerator)
5. Dump machines are random and do not follow a rule at all
In the situation above, this format really dump a headache for computer repairman and users. Because basically you it is difficult to determine the machine has not really end dump, it is best to try and use step by step. In the process of being re-used if we proceed to the next step
Steps to fix (as in sequence, each step to proceed also be used to view a dump or not?)
  • Installing new windows again (remember to install antivirus software to remove the causes viral)
  • Install the driver of the machine correctly
  • Using other memory module (if the machine has more than 1 bar individual use to inspect each bar)
  • Replaced temporarily by a similar motherboard (preferably the same model)
HOW TO FIX BLUE SCREEN OF DEATH
BSOD frustrating for users
6. Conclusion:
This is considered 5 cases blue screen machine is the most common, besides a number of other causes, but easy to identify, such attaching devices (RAM Hard drive VGA Card), installing new software ... the above steps can fix must intervene in the BIOS, reinstall the operating system, check and replace hardware ... these operations will be more difficult if you are office workers and not familiar enough with the computer. Best if not feeling very confident, contact your  computer repair service reputation  to their closest done
HOW TO FIX BLUE SCREEN OF DEATH HOW TO FIX BLUE SCREEN OF DEATH Reviewed by Duy Tín on 11:39:00 PM Rating: 5

No comments:

Powered by Blogger.